Bi fold doors

BI-FOLDING DOORS – To maximize an opening without having to pocket the doors, a Bi-Folding door system can do the job. Panda has a variety of aluminum folding doors to meet a wide variety of project needs. From the S.40 with its hidden hinges for a clean sleek look, to the S.51 with its all aluminum profile for increased strength, to the S.60 with its thermal break for extreme climates, to the S.62 with its wood clad interior for a warm traditional look, to the S.72 with its Beefy Construction that can have either wood or aluminum interior cladding, there is a Panda Bi-folding system that’s right for the job.

• The hinges of this all aluminum door are recessed into the stiles and do not protrude from the profile when the doors are in the closed position. This gives the system a clean, sleek look while also increasing security.
• There are 26 operational typologies that can be either in-swing or out-swing
• Can accept glazing up to ¾” thick.
STANDARD TRACK (TOP RUNNING / BOTTOM GUIDED)
• Good resistance to weather infiltration.
• 2” exterior sill height. Finish floor can be built up to the top of the sill creating a small step.
• STANDARD TRACK (BOTTOM RUNNING / TOP GUIDED)
• Relieves stress from header by distributing panel weight to the bottom track.
• 2 ½” exterior sill heights. Finish floor can be built up to the top of the sill creating a small step.
• STAINLESS STEEL RECESSED TRACK
• ADA compliant
• Good for use in openings where weather infiltration is not a concern.
• 3/8” protrusion above the finish floor

• The hinges are positioned in special housing not to disrupt the magnetic gaskets.
• There are 26 operational typologies that can be either In-swing or out-swing.
• Maximizes 90% of the rough opening when the doors are in the open position. This allows you to maximize your view and minimize your visual obstructions
• Beefier frame than the S.40.
• Maximum panel sizes of 42” wide and 120” high.
• Can accept glazing up to 1” thick.
• STANDARD TRACK (TOP RUNNING / BOTTOM GUIDED)
• Good resistance to weather infiltration.
• 2 3/8”exterior sill height. Finish floor can be built up to the top of the sill creating a small step.
• STANDARD TRACK (BOTTOM RUNNING / TOP GUIDED)
• Relieves stress from header by distributing panel weight to the bottom track.
• 2¹/8”exterior sill height. Finish floor can be built up to the top of the sill creating a small step.
SURFACE TRACK
• ADA compliant
• Good for use in openings where weather infiltration is not a concern.
• 2 mm protrusion above finish floor./li>

• Thermally broken for maximum weather-ability and energy efficiency.
• Hinges are positioned in special housing not to disrupt the magnetic gaskets.
• There are 26 operational typologies that can be either in-swing or out-swing.
• Maximizes 90% of the rough opening when the doors are in the open position. This allows you to maximize your view and minimize your visual obstructions
• Maximum panel sizes of 42” wide and 120” high.
• Can accept glazing up to 1 1/8” thick.
• STANDARD TRACK (TOP RUNNING / BOTTOM GUIDED)
• Good resistance to weather infiltration.
• 1½”exterior sill height. Finish floor can be built up to the top of the sill creating a small step.
• STANDARD TRACK (BOTTOM RUNNING / TOP GUIDED)
• Relieves stress from header by distributing panel weight to the bottom track.
• 2”exterior sill height. Finish floor can be built up to the top of the sill creating a small step.
SURFACE TRACK
• ADA compliant
• Good for use in openings where weather infiltration is not a concern.
• 3/8" protrusion above finish floor./li>

• The hinges of the S.62 are recessed into the stiles and do not protrude from the profile when the doors are in the closed position. This gives the system a clean, sleek look while also increasing security.
• The PVC joint between the aluminum and wood acts as a thermal break which gives this system added weather ability and energy efficiency
• There are 26 operational typologies that are in-swing only.
• Maximum panel sizes of 39” wide and 118” high
• Beefier frame than the S.40.
• Can accept glazing up to7/8”.
• Available in aluminum and aluminum with interior wood cladding
• STANDARD TRACK (TOP RUNNING / BOTTOM GUIDED)
• Good resistance to weather infiltration.
• 2 ½” exterior sill height. Finish floor can be built up to the top of the sill creating a small step.
• STANDARD TRACK (BOTTOM RUNNING / TOP GUIDED)
• Relieves stress from header by distributing panel weight to the bottom track.
• 2 ½” exterior sill height. Finish floor can be built up to the top of the sill creating a small step.
SS RECESSED TRACK
• ADA compliant
• Good for use in openings where weather infiltration is not a concern.
• 3/8” protrusion above the finish floor.

• The hinges of the S.72 are recessed into the stiles and do not protrude from the profile when the doors are in the closed position. This gives the system a clean, sleek look while also increasing security.
• There are 26 operational typologies that can be either in-swing or out-swing
• Maximum panel sizes of 42” wide and 120” high however with the use of dividers, taller panel sizes can be achieved.
• Can accept glazing up to7/8”.
• Available in aluminum and aluminum with interior wood cladding
STANDARD TRACK (TOP RUNNING / BOTTOM GUIDED)
• Good resistance to weather infiltration.
• 2 ½” exterior sill height. Finish floor can be built up to the top of the sill creating a small step.
• STANDARD TRACK (BOTTOM RUNNING / TOP GUIDED)
• Relieves stress from header by distributing panel weight to the bottom track.
• 2 ½” exterior sill height. Finish floor can be built up to the top of the sill creating a small step.
• SS RECESSED TRACK
• ADA compliant
• Good for use in openings where weather infiltration is not a concern.
• 3/8” protrusion above the finish floor.

S. 40 PDF

S. 51 PDF

S. 60 PDF

S. 62 PDF